Directions Ful in the blanks Read the statement carefully and fill the blanks with the correct answer 1 Sealant should be used within 2 Sealant should not be applied to metal that is colder than 3 Before the sealant is applied, the metal warmed to a temperature between 4 is the pressure filling of openings or voids. 5. The joint between two pieces of material formed by a notch and tiled projection is called 6. Sealant should be discarded immediately when it becomes 7. Sealant should not be used for faying surface applications unless it has been removed from 8. Never use RTV sealant around high temperature and pressure, such as for 9. On engine with an oxygen sensor, use only that says sensor safe on the level 10. Sealants cannot be to dirty, greases or oily surface
Share
Answer:
1.Application time
2.70F
3.between 50t and 100 degrees
4.Injection sealing
5.joggle
6.stiff/ hard
7.refrigerated storage
8.head gasket
9.RVT Sealant
10.seal
Explanation:
Hope it helps:)