it is a square slate frame recommended for needlle point ? please answer
Home
/
it is a square slate frame recommended for needlle point ? please answer
it is a square slate frame recommended for needlle point ? please answer
Sign Up to our social questions and Answers Engine to ask questions, answer people’s questions, and connect with other people.
Login to our social questions & Answers Engine to ask questions answer people’s questions & connect with other people.
Answer:
Dressing a Slate Frame for
Embroidery
Slate frames have been around forever – well, certainly since the Middle Ages, and anyway. They’re made up of four parts – two rollers (top and bottom) and two stretchers (sides, with peg holes).
The advantage of a slate frame is that, with them, you can achieve and maintain perfect tension for stitching. In fact, of all the methods I’ve used of mounting any fabric for embroidery, nothing compares to the excellent and even tension you can achieve with a slate frame.
Now, that being said, and as I mentioned yesterday, setting a project up on a slate frame (or “dressing the frame”) takes a wee bit o’ work. And the larger the frame, the more work. Normally, you should be able to accomplish dressing a frame in an hour or so, if your fabric’s prepared and you don’t run into any hitches along the way.
So let’s go step by step through the whole process, including preparing the fabric.
Explanation:
Preparing Fabric for the Slate Frame
There are different ways to prepare your fabric for dressing a slate frame. I’m going to show you one way. I use different ways, depending on the fabric, project, etc.
I’m using Alba Maxima linen from Legacy, a nice medium-weight, sturdy, smooth linen. The first thing I did was shrink the linen. (I’ve already posted on preparing linen for embroidery – scroll down to the shrinkage section!).
Then, I sat down and did some figuring. I don’t love figuring…
Answer:
A slate frame has three basic components:1. two vertical stretcher bars with holes drilled in them usually in a diagonal type pattern 2. two horizontal stretcher bars with heavy canvas joined.,Slate frames have been around forever – well, certainly since the Middle Ages, and anyway. They’re made up of four parts – two rollers (top and bottom) and two stretchers (sides, with peg holes).
The advantage of a slate frame is that, with them, you can achieve and maintain perfect tension for stitching. In fact, of all the methods I’ve used of mounting any fabric for embroidery, nothing compares to the excellent and even tension you can achieve with a slate frame.
Now, that being said, and as I mentioned yesterday, setting a project up on a slate frame (or “dressing the frame”) takes a wee bit o’ work. And the larger the frame, the more work. Normally, you should be able to accomplish dressing a frame in an hour or so, if your fabric’s prepared and you don’t run into any hitches along the way.
So let’s go step by step through the whole process, including preparing the fabric.
Preparing Fabric for the Slate Frame
There are different ways to prepare your fabric for dressing a slate frame. I’m going to show you one way. I use different ways, depending on the fabric, project, etc.
I’m using Alba Maxima linen from Legacy, a nice medium-weight, sturdy, smooth linen. The first thing I did was shrink the linen. (I’ve already posted on preparing linen for embroidery – scroll down to the shrinkage section!).
Then, I sat down and did some figuring. I don’t love figuring…
Explanation:
yan lang ang nakita ko sa web