list down the 8 procedures in creating a copper cable splicing
Share
list down the 8 procedures in creating a copper cable splicing
Sign Up to our social questions and Answers Engine to ask questions, answer people’s questions, and connect with other people.
Login to our social questions & Answers Engine to ask questions answer people’s questions & connect with other people.
Answer:
1. Cut into the plastic sheath 1 inch from the end of the cut cable.
2. Unwind and pair the similar colors.
3. Pinch the wires between your fingers and straighten them out as shown. The
color order is important to do this correctly.
4. Use the razor blade of the crimping tool to make a straight cut across the
wires 1/2 inch from the cut sleeve to the end of the wires.
5. Push the wires into the connector.
6. Take view from the top. Make sure the wires are all the way in. There should be no short wires.
7. Crimp the cable carefully by placing the connector on the 8 pins holder of the crimping tool then grip it tightly.
8. Test the cable using a LAN tester.