Result
Plan
360-grit
Fillers
80 to 100- grit
Top materials
clean
dust
sharp knife
large gouge
----------------------------------------------
1. Remove ______ every time after sanding with clean rag.
2. Put _____ into the cracks and holes of wood before polishing uneven surfaces.
3. Use _____ sandpaper when sanding rough surfaces of wood.
4. When painting, let first coating dry throughly before applying the second coating until you arrive the best _____.
5. When applying varnish, always _____ the parts of the product.
6. Remove _____ of gold leaf before laying on the surface of the object.
7. At the start of wood turning, use _____ to rough out and round off the piece.
8. In refining the wood surface use _____ or higher sandpaper.
9. When painting, it should be done at the _____ part going downard.
10. Before doing any method of enchancing a product, a person should have a _____.
Share
Verified answer
Answer:
1.large gouge
2.fillers
3.dust
4.result
5.80 to 100 grit
6.top materials
7.sharp knife
8. back paper
9.clean
10.plan
Explanation:
hope it helps brainliest pls