what is the correct way of reading a water meter.
Share
what is the correct way of reading a water meter.
Sign Up to our social questions and Answers Engine to ask questions, answer people’s questions, and connect with other people.
Login to our social questions & Answers Engine to ask questions answer people’s questions & connect with other people.
Answer:
1.
Locate your water meter. Residential water meters can ordinarily be found at the front of the property near the curb or street. They are most often housed in concrete boxes underground with heavy steel covers that are bolted shut and labelled “Water” for ease of identification.
2.
Remove the cover of the meter box. Insert a screwdriver or similar tool into one of the small holes in the cover and pry it up carefully. Set the cover aside somewhere nearby. If your meter box has a hinged cover, simply pull back the lid.
3.
Check whether your property has analog or digital meters. An analog meter will appear as a large circular dial that may have one or more moving hands.[3] Newer digital meters feature glowing readouts similar to an alarm clock and don’t require any complicated calculations to read.
4.
Write down the number on the display. Jot down the reading exactly as it appears. You can refer back to this number later when tabbing out your daily, weekly, or monthly usage.
5.
Write down the number on the display. Jot down the reading exactly as it appears. You can refer back to this number later when tabbing out your daily, weekly, or monthly usage.
6.
Fill in the last digit of the readout. The last digit on the display is a painted on “static zero,” which means it always appears as a zero. It's a placeholder. Its value becomes the number the sweep hand is pointing to. You enter this as part of your reading. To ensure that you’re getting an accurate reading be sure to include it.
7.
Record the usage and flow rate straight from a digital meter. If your property is outfitted with a digital display, you’re in luck—they’re much easier to make sense of. The row of numbers at the bottom shows the total amount of water registered by the meter. The smaller readout in the corner is the rate of flow, or the amount of water that passes through your home per minute.
8.
Replace the meter cap. Don't forget to fit the protective cap back over the dial before you close up the water meter box. This will help prevent possible damage and keep it clean so it can be easily read in the future.
REMINDER:
First, notice what the register increment is. In this case, it is in GALLONS. It could be Cubic Feet, or outside the USA it may be Cubic Meters. You will notice on this register that one of the numerical readings of the odometer is not a moving wheel like the others, but is a printed zero. Almost no utility bills water to the actual gallon. If they bill to 10-gallon increments, they would read only the moving white and black wheels for a reading of 53580. Why 80 and not 90 is explained in the next step. On larger meters, there could be two or more printed zeros represented by the sweep hand.
The printed zero is actually replaced by the location of the sweep hand for actual usage, troubleshooting, or testing. If on the 2 circled, it would be replaced by 2. Each full number is one gallon in this case, so if the sweep hand moves from 3 to 4 as shown with the arrow, that is one gallon of usage. The numbers between are 10ths of gallons, so the number circled between 4 and 5 represents 4.7 gallons. In THIS meter, the sweep hand is on 6.5, so the fixed zero is replaced by 6.5 gallons for actual use.
You will notice the first MOVING number wheel is moved between 8 and 9. It is not fully centered on 9 yet, and the sweep hand is on 6.5, so it is counted as 8. When the sweep hand reaches directly on "0" it will then count as 9. The odometer wheel will be centered and counted as whole. Reading the last TWO digits, one moving and one fixed is 86.5 gallons.
// brainiest please -3-