Write the corresponding safety tips of the following tools below.
Share
Write the corresponding safety tips of the following tools below.
Sign Up to our social questions and Answers Engine to ask questions, answer people’s questions, and connect with other people.
Login to our social questions & Answers Engine to ask questions answer people’s questions & connect with other people.
1.) Wire Cutter-
Wear safety glasses or goggles, or a face shield (with safety glasses or goggles)
Cut at right angles.
Never rock the cutting tool from side to side or bend wire back and forth against the cutting edges.
2.) Philips Screwdriver-
Do not use a screwdriver as a punch, wedge, pinch bar or pry.
Keep the tip clean and sharp to permit a solid grip on the tip of the screw.
Keep the handle of the screwdriver clean and intact to allow for a solid grip.
Never hold the piece you are working on in your hand.
3.) Tweezer-
Sanitize your tweezers. You don't want to use dirty tweezers around your eyes and face.
Dry them well.
Use them for tweezing only.
Keep the rubber tip on.
Don't drop them.
Use a light touch.
Store them properly.
Sharpening not required.
Answer:
1.Wire cutter
Wear safety glasses or goggles, or a face shield (with safety glasses or goggles) whenever there is a potential hazard from flying particles, pieces of wire, etc. Cut at right angles. Never rock the cutting tool from side to side or bend wire back and forth against the cutting edges
2philips screw
Do not use a screwdriver as a punch, wedge, pinch bar or pry.
Keep the tip clean and sharp to permit a solid grip on the tip of the screw.
3tweezer
Sanitize your tweezers. You don't want to use dirty tweezers around your eyes and face. ...
Dry them well. ...
Use them for tweezing only. ...
Explanation:
hope it helps,thank me later